<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3603" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Calibri size=2>Having similar problems with the 781 and mk2r+...
mk2r+ works great and I get perfect reading as</FONT></DIV>
<DIV><FONT face=Calibri size=2>I move my knob , but wintest reads the fequency
initially but when you move freq it stops</FONT></DIV>
<DIV><FONT face=Calibri size=2>reading it and you have to shut down win-test and
back on to read again.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Calibri size=2>using n1mm I dont have the problem, it works
fine... any ideas?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Calibri size=2>Felipe</FONT></DIV>
<DIV><FONT face=Calibri size=2>NP4Z</FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=n6tv@arrl.net href="mailto:n6tv@arrl.net">Bob Wilson, N6TV</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=support@win-test.com
href="mailto:support@win-test.com">support@win-test.com</A> ; <A
title=neil@neilshapiro.com href="mailto:neil@neilshapiro.com">Neil Shapiro,
W2NLS</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, October 21, 2009 9:55
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [WT-support] Icom 746 Pro
Connection Help?</DIV>
<DIV><BR></DIV>Neil,<BR><BR>Are you using Win-Test 4.2?<BR><BR>Is your IC-746
Pro using the default address (66h) or the IC-746 address (56h) (check the
Icom menus).<BR><BR>In Win-Test, did you select Radio Type IC-746 or
IC-746Pro?<BR><BR>Did you exit HRD before starting Win-Test?<BR><BR>Are you
using a USB-to-serial converter or microHAM device or other virtual serial
port, or a "real" COM4 serial port? If it's not a real COM port, maybe
you need updated device drivers for Vista 64, or maybe you should try COM5 in
case COM4 comflicts with some other port on your PC.<BR><BR>Have you tried
setting DTR and/or RTS to Handshake when "Use CI-V" was NOT
checked?<BR><BR>Please send me a screen shot of your Win-Test SETUP screen and
COM port Config screen and any screens from a virtual COM port setup
program.<BR><BR>Finally, powering everything off and on in sequence sometimes
fixes things.<BR>
<OL>
<LI>Power up computer
<LI>Wait for boot to complete<BR>
<LI>Power up Radio
<LI>Start Win-Test<BR></LI></OL>Do you have a laptop or other (non Vista)
machine you can try?<BR><BR>73,<BR>Bob, N6TV<BR><BR>
<DIV class=gmail_quote>On Wed, Oct 21, 2009 at 6:28 PM, Neil Shapiro <SPAN
dir=ltr><<A
href="mailto:neil@neilshapiro.com">neil@neilshapiro.com</A>></SPAN>
wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">I
just got Win-Test today and was hoping to use it in the upcoming<BR>CQWW
contest this weekend. But no matter what I try I can't seem to<BR>connect my
Icom 746 Pro to the program. When I am in Ham Radio Deluxe<BR>the connection
works fine set to Com 4, 19,200 and with DTR checked.<BR>In Win-Test I have
tried the default which is both DTR and RTS set to<BR>off, then I have tried
DTR set to On, no luck. I have tried baud rates<BR>of 9600 and no luck. I
have tried with CI-V and polling set to both on<BR>and off (all combos) and
no luck. Does anyone have an Icom 746 Pro<BR>working with this that you
could share the settings with me? Or if you<BR>know.... Oh, running Vista 64
here. Help?? -- Neil (W2NLS)</BLOCKQUOTE></DIV><BR>
<P>
<HR>
<P></P>_______________________________________________<BR>Support mailing
list<BR>Support@win-test.com<BR>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support<BR></BLOCKQUOTE></BODY></HTML>