I have never seen this problem, but I am still running microHAM router version 5 and older K3 FW, and I use a real LPT port for SO2R switching and DVK funciton, instead of the microHAM Control Protocol.<br><br>When you lose the frequency data, I assume the microHAM router program still displays the frequency OK, after you exit Win-Test to close the COM port.  That indicates a communications failure between Win-Test and the microHAM virtual COM port (could be a Router bug).<br>

<br>Did you ever turn on the communications log (MON button)?  Maybe it is filling up a buffer.  Make sure the microHAM port monitor is disabled.<br><br>I assume that you are using the K3 default values and baud rate on the COM port:  4800,N,8,2 / Always Off / Always Off.<br>

<br>If the problem still occurs, I think your only option is to turn the Port Monitor ON and try to capture the communications log at the time of the failure.<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Wed, Oct 7, 2009 at 10:34 AM, Toni Lindén <span dir="ltr"><<a href="mailto:oh2ua@oh2u.com">oh2ua@oh2u.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi!<br>
<br>
<br>
For some reason Win-Test seems to lose radio data every once in a<br>
while when using K3 radios and microHam router.<br>
<br>
Setup here: WT 4.1.0 + microHam router 7.2.4. + K3 with latest FW.<br>
<br>
When WT's been running for a while, router lose radio data (and MK2R+<br>
says busy). If I close the WT, QRG information returns as soon as WT<br>
is been terminated.<br>
<br>
Haven't had similar problems ever before with FT1000MarkV or with FT2000.<br>
<br>
I found this behaviour crucial because I don't want to turn logging SW<br>
off every hour or two hours.<br>
<br>
<br>
73 de Toni, OH2UA</blockquote></div><br>