I found the K3 commands for DVR playback in the <a href="http://www.elecraft.com/manual/K3_Pgmrs_Ref_Rev_B22a.pdf">K3 Programmer's Reference</a>:<br><br>RIT CLEAR="RC;"<br>PLAY M1="SWT21;"<br>PLAY M2="SWT31;"<br>

PLAY M3="SWT35;"<br>PLAY M4="SWT39;"<br>PLAY HALT="SWT37;"<br><br>So all the radio commands are there; it's just a matter of getting Win-Test and/or Omni-Rig to issue them.<br><br><i></i>73,<br>

Bob, N6TV<br><br><div class="gmail_quote">On Tue, Oct 6, 2009 at 3:18 PM, Bob Wilson, N6TV <span dir="ltr"><<a href="mailto:n6tv@arrl.net">n6tv@arrl.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

There still does not seem to be a way to send a radio-specific command string, which would be really useful not only for K3 DVR (radio voice keyer) control, but also for a CLEAR RIT function.<br><br>Perhaps the best thing long term would be for Win-Test to add support for VE3NEA's <a href="http://www.dxatlas.com/omnirig/" target="_blank">Omni-Rig</a> interface, where the pmRit0 mnemonic defines the RIT CLEAR command.  There doesn't seem to be an Omni-Rig mnemonic DVR control, but there is a SendCustomCommand method.<br>


<br>In the mean time, something quick that could be implemented in time for CQ WW Phone would be new strings in the WT.INI file that we could just type in with a text editor, e.g., in WT.INI, we could manually add the following for a K3<br>


<br>[Radio1]<br>...<br>RITCLEAR="RC;"  (ASCII string)<br>PLAYMSG1=0x0201 (not sure what to put here, some hex string perhaps)<br><br>[Radio2]<br>
...<br>
RITCLEAR="RC;"<br>
PLAYMSG1=0x0201<br>
<br>Then new message variables $RITCLEAR and "PLAYMSG1" could send whatever strings they find in WT.INI to the radios, and it would be up to us (the rig owners) to figure out what's works for each rig type.  We could share these in the Wiki, and once the list was complete, it would then be trivial for the developers to add these new comands to Win-Test and/or Omni-Rig so that we no longer would have to manually edit WT.INI.<br>


<br>73,<br><font color="#888888">Bob, N6TV</font><div><div></div><div class="h5"><br><br><a href="http://www.dxatlas.com/omnirig/" target="_blank"></a><div class="gmail_quote">On Tue, Oct 6, 2009 at 2:18 PM, Marios Nicolaou <span dir="ltr"><<a href="mailto:drmarios@gmail.com" target="_blank">drmarios@gmail.com</a>></span> wrote:<br>


<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi all<div><br></div><div>I was wondering whether there is a way of sending a specific command to the K3 via the CAT control when pressing the F1 or F2  etc using a script. I would like to control the DVR of the K3</div>


<div>
<br></div><div>I suspect the answer is NO and I know  there was talk about it a while back but has it happened?</div><div><br clear="all">73s<br><font color="#888888">-- <br>Marios<br>5B4WN/G0WWW/C4W</font></div></blockquote>


</div><br>
</div></div></blockquote></div><br>