Are you pressing [Alt-F1] or [Alt-F2] to change bands, or entering a frequency
in the Win-Test main window, or pressing buttons on the radio to change bands?  If one
method works, but the other doesn't, just use the method that works.<br><br>
Are you using a real serial port for rig control (like COM1), or a virtual COM port via a USB-to-Serial converter or microHAM device driver?  If virtual, you may be able to capture the communications between Win-Test and the Radio to provide useful feedback to the developers.  If real, perhaps you could use <a href="http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx">Portmon</a> to capture the communications stream.<br>

<br>In Win-Test SETUP, after pressing the [Configure] button for the Radio's COM port, did you press the [FT-817 Default Settings] button to configure the COM port for 4800,N,8,2 Always Off/Always Off?<br><br>If you change the CAT RATE in the FT-817 menu from the default setting of 4800 to some other rate, Win-Test SETUP must match it.<br>

<br>If you checked "Don't poll", uncheck it.<br><br>Does the Win-Test Radio 1 Bandmap display the correct frequency of both VFOs, or the word "Split"?<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">

On Fri, Oct 2, 2009 at 4:04 AM, Andy Barter <span dir="ltr"><<a href="mailto:andy.barter@ntlworld.com">andy.barter@ntlworld.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

Hi<br>
<br>
I have just installed Win-Test v4 ready to use in the CQWW contest. I have<br>
been testing the rig control with my FT817 and notice the mode is not set<br>
correctly when I change band. If I set to 80m with the FT817 set to LSB and<br>
change band up to 20m the mode on the FT817 is set to LSB even though the<br>
FT817 was set up for USB on 20m. Is there a setting that I have not found<br>
yet to overcome this problem. I cannot try rig control out on any other rig<br>
at the moment.<br>
<br>
73<br>
<br>
Andy - G8ATD (Contest organiser for G3B)<br>
<br>
_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</blockquote></div><br>