<div class="gmail_quote">On Wed, Aug 26, 2009 at 10:37 AM, SM5AJV <span dir="ltr"><<a href="mailto:sm5ajv@qrq.se">sm5ajv@qrq.se</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">


ALT-T<br>
I have noticed that the ALT-T (listen to secondary radio)<br>
toggles the Audio 'Radio' button in the Secondary Window<br>
but the HW-signal (RTS or DTR) doesn't toggle. Is this a<br>
Bug?</blockquote><div><br>Does RTS/DTR toggle when you press [*], or [*] and [F4]?  By design, headphone switching can be separate from transmitter switching.<br> <br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">


PTT-signal<br>
How is the PTT-signal supposed to work when you have<br>
interfaced a WinKeyer as keying device? I couldn't see<br>
any ON/OFF-changes on the RTS/DTR-pins.</blockquote><div><br>It is handled by the WinKey chip.  For the WinKey 2, Pin 9 is PTT1, Pin 3 is PTT2.  Note that PTT delay may not work if you try to use the Win-Test WKSETUP menu, which was designed to support the original WinKey chip, not the WinKey2.  You have to use dedicated WinKey set-up software (e.g. microHAM Router program) to configure the WinKey2 PTT seettings.  <br>

<br>The WinKey "Admin" command:<br><br><00><01> <br><br>will reset everything in the WinKey2 and probably clear Farnsworth mode.  <br><br>Better yet, if you can send the Farnsworth command<br><br><0D><0A><br>

<br>to the WinKey, the will disable Farnsworth mode for 10 WPM or more.  This happens to the CR-LF sequence.  So if you create a 2-byte file with these characters in it (Use Notepad to create a new file if the attachment fails to come through, Press Enter once to move the cursor down one line, File Save) and write that file to the WinKeyer COM port, that may reset Farnsworth mode.<br>

<ol><li>Exit Win-Test<br>From a DOS command prompt:</li><li>MODE COMx: 1200,8,n,2</li><li>COPY /b TheTwoByteFile.txt COMx:</li></ol>Where "x" is your WinKey port, e.g. COM5:  .<br><br>Don't forget the trailing colon (:).  Please report results; I haven't confirmed that this works.<br>

<br>73,<br>Bob, N6TV</div></div>