<div class="gmail_quote">On Thu, Jul 23, 2009 at 11:41 AM, hank.k8dd <span dir="ltr"><<a href="mailto:hank.k8dd@gmail.com">hank.k8dd@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

<div id=":2c" class="ii gt">Then I tried SO2R.  Both the information for the K3 and the K2 show up, but I can't switch radios on CW.  The display switches from Radio1 to Radio 2, but the WinkeyerUSB does not switch outputs.</div>

</blockquote></div><br>In WKSETUP (Options | WinKey configuration), did you set <b>Second Output (Pin 5)</b> to <b>Radio 2</b>?  Please try it and report results.  <br><br>It may not work.  I don't see the red "active TX" indicators change in the Secondary Radio window when I press [*]. Only the "Active RX" bars are being swapped.  Maybe that's a just display issue, and it still works.<br>

<br>Question for the WT developers:  does Win-Test generate the WinKey "Set PinConfig" <09>nn command?  That seems to be the only way to switch between Key 1 and Key 2 outputs.  See Page 8 in the <a href="http://k1el.tripod.com/WinkeyUSBman.pdf">WinKey USB manual</a>.<br>

<br>The WinkeyerUSB is not an SO2R box like EZMaster or microHAM MK2R.  It doesn't support headphone or microphone switching, only CW Key and PTT switching.  So a WinKey cannot support all of the SO2R functions built into Win-Test, only some of them.<br>

<br>Have you tried putting the $TR1 and $TR2 macros into a CW message?  These may not work either.  These macros may only work with supported SO2R boxes.<br><br>If you have an LPT port, you can use the "active radio" pin (LPT Pin 14) to swap radios, but you'll need some circuitry to make it work, or a legacy SO2R box.<br>

<br>You probably have to take care to tell Win-Test that you are using only ONE device for Radio 1 / Radio 2 switching.  If you have a microHAM MK2R listed on COM3:, a WinKey with Second Output (Pin 5) enabled on COM4:, and have "Active Radio" checked on LPT Pin 14, how is Win-Test supposed to know which one to use to switch radios?  Specify only ONE of these options.<br>

<br>73,<br>Bob, N6TV<br>