There seems to be a bug in wtRotators version 1.0.  It doesn't seem to accept any Win-Test commands if the "Antenna Name" column is left blank.  Try putting a name like "Yagi" in there:<br><ol><li>wtRotators window: Controllers | Edit | <i>your rotator name</i></li>

<li>Select an unused COM port</li><li>Enter a rotator name like "HyGain"</li><li><b>Enter an Antenna name like "Yagi" on line 1</b>.  Leave everything else blank.</li><li>Do not check "rotation limits" unless you have a side-mounted antenna that can't rotate the full 360°<br>

</li><li>Press [OK]</li><li>Back in Win-Test, enter a callsign and press [Ctrl]+[F12]</li><li>Do you see any messages in the wtRotators Window?  If not, verify that both Win-Test and wtRotators are using the loopback address 127.255.255.255 port 9871.<br>

</li></ol>Note:  wtRotators opens <i>two </i>windows, and one is minimized at start-up.  The minimized window is the one you want to look at, so activate it from the Windows Task Bar.<br><br>I see messages like this when I enter a call in Win-Test and press [Ctrl]+[F12]:<br>

<br>COM1 to HyGain: opened<br>Set HyGain rotator to: 304<br>Set HyGain rotator to: 028<br><br>But the "Set" messages stop if I blank out the "Antenna Name" column.<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">

On Thu, Jul 23, 2009 at 8:30 AM, Don Richards W7UPF <span dir="ltr"><<a href="mailto:donsay2@cox.net">donsay2@cox.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

Has anyone successfully installed the file (wtRotators.exe) for both the<br>
stand-alone operation and as an integrated feature of Win-Test 4.0.1<br>
when using a Hy-Gain DCU-1 rotor  (Yaesu G-1000DXA rotor with the Idiom<br>
control card)?  W7UPF<br>
</blockquote></div><br>