OK, now I see.  Yes, if you put the second VFO on a different <i>band</i> (some rigs like FT-1000MP don't really support that very well), then it might be nice to have separate "VFO A" and "VFO B" band maps.<br>

<br>You can almost get this function today using the [Alt-A] window (DX Announcements).  Right Click on it, then click Displayed Bands, then select only the band were VFO B is set up.  Then [Alt]-double-click on a spot in the DX Announcements window to load a spot into VFO B, or right click and  select "Pass frequency to SUB VFO."<br>

<br>Back to the band map, you can double-click on the "VFO A" and "VFO B" windows at the top, and they get highlighted.  But they don't seem to work quite as I expected (displayed spots don't change if VFO A and B are on different bands).  That might be a bug (I have no radios connected to this PC, so I was trying to use [Ctrl-Enter] to simulate it).<br>

<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Tue, Jul 7, 2009 at 6:13 PM, AC0W <span dir="ltr"><<a href="mailto:ac0w@charter.net">ac0w@charter.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

Bob,<br>
<br>
Maybe I'm missing something in this post but the post on this subject hits the nail on the head of what is desired. For those of use with a 2 VFO rig we utilize the 2nd VFO in dual receive like a second radio, i.e. SO2V. So there is a need to display the band map for each VFO and have each band map have spot automatically updated just as if it is SO2R.<br>


<br>
Bill<br>
<font color="#888888">AC0W<br>
</font><div><div></div><div class="h5"><br>
---- "Bob Wilson wrote:<br>
To load a spot into the Sub VFO rather than the main VFO, in the band map<br>
[Alt]-double-click on the spot<br>
-or-<br>
Right click on the spot and select "Pass frequency to SUB VFO".<br>
<br>
This works if your radio supports setting VFO B (I believe some Icom models<br>
do not support it).<br>
<br>
For more info. see<br>
<a href="http://docs.win-test.com/wiki/Menu:Windows#Radio_1.2C_Radio_2_.28Band_Maps.29" target="_blank">http://docs.win-test.com/wiki/Menu:Windows#Radio_1.2C_Radio_2_.28Band_Maps.29</a><br>
<br>
Win-Test supports two band maps (Radio 1 and Radio 2).<br>
<br>
73,<br>
Bob, N6TV<br>
<br>
On Tue, Jul 7, 2009 at 3:12 PM, Oliver Grossmann <<a href="mailto:oliver.grossmann@bretzi.de">oliver.grossmann@bretzi.de</a><br>
> wrote:<br>
<br>
> Hi,<br>
><br>
> I discovered just now there is no extra Band Map for 2nd VFO. So i<br>
> won't recognize if a new spot will appear or i can't set the 2nd RX to<br>
> QRG of new Multistation without switching.<br>
> Maybe there is a check where i can activate a extra band map per VFO,<br>
> i haven't found it.<br>
><br>
> I'm not the Win-Test Expert because i used it just a couple of times<br>
> in Multi2 Operation.<br>
> For SO1R 2VFO i used N1MM, but last Time in WPX my PC froze one time<br>
> and i had to reboot.<br>
><br>
> So I'm very close to buy Win-Test<br>
><br>
> It looks like big support for SO1R 2VFO isn't implemented jet. The<br>
> main scope is on SO2R and M/M Operation (like announced from the<br>
> Win-Test Crew).<br>
> Are there some plans to add a SO1R 2VFO Operation Mode in Wintest in<br>
> the near Future?<br>
><br>
> It should have a 2nd Bandmap for the 2nd VFO and the Switch VFO<br>
> Feature. Okay Zoli is right there is the A/B Button, so a 2nd Bandmap<br>
> would be the biggest improvement.<br>
> My wish: Set under "Operating->Technique" to SO1R 2VFO and i can<br>
> switch like in SO2R the Radios the VFOs and i have a Bandmap for VFO A<br>
> and B under "Window"<br>
><br>
> cheers<br>
> Olli, DH2WQ<br>
><br>
</div></div></blockquote></div><br>