<p><br />Hi Bob</p>
<p>Thanks for the tips.</p>
<p>No, I was not using cut numbers (except for leading zeros up to 100).  My F2 is
programmed almost that way, actually +599-$SERIAL . What I really am looking for is the
Farnsworth spacing. I am using a Sony VAIO (no LPT) connected to a microham MKII via USB
2.0.</p>
<p>As forr the + delay, maybeit is caused by disk activity. Does win-key saves the data
after every QSO? </p>
<p>Marcelo, PY1KN</p>
<p><br />> On Wed, Jun 3, 2009 at 6:37 AM, <marcelo@alternex.com.br> wrote: <br
/>> <br />> I found the outgoing serial numbers a bit crammed. Maybe it is just an
<br />>> impression, but I had an unusual high number of repeat requests. <br
/>>> <br />> <br />> Were you sending "cut numbers" via Options |
CW | Serial Number | <br />> Abbreviated ? Cut numbers confuse many operators, and
you will often be <br />> asked for repeats. You can use the text command NOABBREV to
disable this. <br />> <br />> Is there any parameter anywhere (wintest, winkey) to
insert a tiny fraction <br />>> of a second between each figure of the S/N? <br
/>> <br />> <br />> No, but you can program [F2] with <br />> <br />>
$RST -$SERIAL+ <br />> <br />> to send the serial number 4 WPM slower than the
"5NN". <br />> <br />> WinKey has a Farnsworth mode that puts extra
spaces between every character, <br />> but WinTest doesn't give you any way to
temporarily switch it on and off. <br />> <br />> I also had a small but annoying
delay between pressing the + key and the <br />>> start of transmission. <br
/>>> Maybe I need a faster computer, maybe it’s the time to process the <br
/>>> $CORRECT. It is <br />>> really annoying in fast pile-ups. <br />>
<br />> <br />> Check your [+] message for leading blanks before the
"TU". Also, how slow <br />> is your computer (CPU, RAM, Operating System)?
Are you using a WinKey USB? <br />> Is it connected to a USB 2.0 port or USB 1.1? Are
you logging to a slow <br />> drive (flash memory or floppy disk)? <br />> <br
/>> Does the delay go away if you disable the WinKey and use LPT keying? If you <br
/>> use the SOUND command to monitor CW, do you still hear the delay? <br />> <br
/>> 73, <br />> Bob, N6TV <br />>
_______________________________________________ <br />> Support mailing list <br
/>> Support@win-test.com <br />>
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support <br />> <br /></p>