<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16735" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Additionally, I went back to 3.25.0 after doing all
I could think of with 3.25.1. No difference....serial numbers still keep
going in sequential order no matter which computer/band it is logged
on.</FONT></DIV>
<DIV><FONT face=Arial size=2>I tested this in M/S, M/2 and M/M only to have it
do the same thing.....still no qso numbers by band as needed. Obviously a
M/2 or a M/M cannot be done if serial numbers are not being generated by
band. Only way around this would be to disable the network....but it would
be useless to operate that way.</FONT></DIV>
<DIV><FONT face=Arial size=2>Once again, serial numbers by band is what is
needed. In reading all the posts I can find, it appears to me that this is
supposed to work but I cannot make it happen. After 3 hours of trying to
figure out why, I have just decided to give up and hope that someone can tell me
what needs to be done.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Bob NX5M</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=nx5m@txcyber.com href="mailto:nx5m@txcyber.com">Robert Pack</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=support@win-test.com
href="mailto:support@win-test.com">WinTest Support</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, March 21, 2009 6:02
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [WT-support] WPX
Multi-Single</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I have been away for a while and am just not
starting to get things in order for WPX.</FONT></DIV>
<DIV><FONT face=Arial size=2>3.25.1 installed.</FONT></DIV>
<DIV><FONT face=Arial size=2>I thought I could keep serial numbers by band in
M/S but this does not appear to be working for some reason.</FONT></DIV>
<DIV><FONT face=Arial size=2>One radio is set as RUN while the other is set as
MULT but when I enter a qso on the run OR mult computer the serial number is
sequential.</FONT></DIV>
<DIV><FONT face=Arial size=2>What I need to see is the qso number on the mult
station logging line to show what serial number is to be sent when a mult is
worked on the mult station.</FONT></DIV>
<DIV><FONT face=Arial size=2>Is there a command or something that I am missing
such as "keep serial numbers by band"??</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>73,<BR>Bob NX5M</FONT></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>Support mailing
list<BR>Support@win-test.com<BR>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support<BR></BLOCKQUOTE></BODY></HTML>