<div class="gmail_quote">2009/2/24 Rick Dougherty NQ4I <span dir="ltr"><<a href="mailto:nq4i@contesting.com">nq4i@contesting.com</a>></span><br><blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
Hi
all...just added a WinKeyer to one of my stations...got it working on
cw with Win-Test pretty quickly...but on ssb another problem....anybody
successful using Win-Test with Winkeyer on ssb with Yaesu FT-1000D??? I
am sure that I am close just need a little guidance...thanks de Rick
NQ4I
<br></blockquote><br>2009/2/24 Rick Dougherty NQ4I <span dir="ltr"><<a href="mailto:nq4i@contesting.com" target="_blank">nq4i@contesting.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

my mistake on the previous post...I am using Micro Ham MicroKeyer and Win-test..de Rick NQ4I
</blockquote><div><br></div></div>See <a href="http://www.microham-usa.com/appnotes/appnote38.pdf">http://www.microham-usa.com/appnotes/appnote38.pdf</a> for instructions on connecting your PC sound card to your microHAM microKEYER.  Note the section on PTT.  If you are using VOX select "A", if you are using Win-Test to generate PTT via a COM port, select "B", and if you are using a footswitch plugged into the back of the mciroKEYER select "C".<br>
<br>In Win-Test <a href="http://docs.win-test.com/wiki/Menu:Options#Configure_interfaces...">Interface configuration</a> check "Enable sound card" and select the appropriate sound card.  <br><br>Program one of your virtual COM ports for PTT (aka "Other interface").  Use the same COM port as defined in the microKEYER Ports tab for PTT.  Press the [Configure] button on the Interface configuratoin screen, next to that "Other inteface" COM port, and set RTS (Pin 7) to PTT, then press [OK].<br>
<br>To program the CQ message, Press [Shift-F1] and speak into the microphone, then click [STOP] to halt the recording.  Repeat the process for your other messages.<br><br>To play back the message, press [F1].<br><br>73,<br>
Bob, N6TV<br>