Hi all,<div><br></div><div>I am using WT with an MK2R (and occasionally a MicroKeyer) and I get the following problems:</div><div><br></div><div>- Varying speed of certain messages. For instance, running at 30wpm, regularly the "+" message will be sent at 36 wpm or more. Sometimes it is just the exchange "INS" message. It is can occur at any speed.</div>

<div><br></div><div>- Sometimes sending with paddles connected to the Microham device, will leave the setup in a state that no WT F-keys function. One has to either send a dash/dot with the paddles or press esc. This seems to unblock WT and F-keys function correctly (even sending all the key presses that have failed before unblocking).</div>

<div><br></div><div>- There are situations that pressing an F-key, will send only the first letter of the message. WT will then block for good and the only cure I've found is to restart the router and WT. If I just type setup on WT and then click on OK, WT will simply crash.</div>

<div><br></div><div>The setting I do use are a winkey com port set up with the defaults offered by WT, I leave also the speed control to be not-synchronized between WT and MicroKeyer, controlled by the knob. The radio if relevant is a K3 a 756 and a 756proIII</div>

<div><br></div><div>If you need more information I'll be happy to provide it for.</div><div><br></div><div>73's Nick</div>