<div class="gmail_quote">On Thu, Jan 22, 2009 at 7:51 PM, Tom W8JI <span dir="ltr"><<a href="mailto:w8ji@w8ji.com">w8ji@w8ji.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
I have my USB winkeyers working now and working with<br>
Wintest, but  cannot seem to change the keyer settings like<br>
weight or ratio or compensation without closing wintest and<br>
opening the keyer.</blockquote><div><br></div><div>Normally only one program can talk to a Winkey at a time, via its virtual COM port.</div><div><br></div><div>Do your USB keyers use the original Winkey chip, or the Winkey2 chip?  Win-Test can change some settings on the Winkey chip via the WKSETUP command, but AFIK they never added support for specific Winkey2 features, or weight / keying compensation adjustments.  Maybe they will enhance the Winkey setup screens in the future.</div>
<div> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"> I also cannot seem to get full speed<br>
range on the keyer knob, I've only tried that with the keyer<br>
speed set to control the computer speed also.</blockquote><div><br></div><div>Try letting Win-Test alone control the speed of the Winkey, instead of using the speed knob.  I know that pressing [Alt-F9] and [Alt-F10] it is not nearly as nice as turning a knob, but for now it may be the only way to get the full speed range that you want.</div>
<div><ol><li>Type WKSETUP [Enter] in the callsign field</li><li><a href="http://docs.win-test.com/wiki/Menu:Options#WinKey_configuration...">This window</a> is displayed</li><li>Under "CW Message and Paddle speeds", select Synchronized (Independent is problematic)</li>
<li>Under "Speed setting" select "Only by the Win-Test commands"</li><li>Press Alt-V or Alt-F9/Alt-F10 to verify that the full WinKey speed range is available, and the POT speed is ignored while Win-Test is running.</li>
</ol><div>I use a <a href="http://www.amazon.com/Griffin-1100-PWRMTS-PowerMate-Multimedia-Controller/dp/B000RZO482">Griffin Powermate USB knob</a> to send Alt-F9 and Alt-F10 "commands" to Win-Test, giving me speed control that way (but more often I still use Alt-F9 or Alt-F10 or Alt-V).</div>
<div><br></div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Does this seem right? I imagined I would have full<br>
functional control of the keywer while wintest was running.<br>
Was that incorrect, and you can only set it when wintest is<br>
not on that com port?</blockquote><div><br></div><div>As is often the case, only one program can use a serial port at a time, even if it is a virtual serial port.  There are exceptions, but Win-Test is not one of them.</div>
<div><br></div><div>If you want to adjust the Winkey weight/compensation settings often, you don't have to exit Win-Test completely.  Just type SETUP, uncheck the Serial port for the WinKey and press [OK].  Then adjust the Winkey settings with your other software and exit it, then type SETUP again in Win-Test and re-establish the serial port for the Winkey.</div>
<div><br></div><div>In sum, there are many opportunities to enhance the Winkey support within Win-Test, but for now only the basics are supported.</div><div><br></div><div>73,</div><div>Bob, N6TV</div></div>