2009/1/7 Rudolf Schwenger <span dir="ltr"><<a href="mailto:Rudolf.Schwenger@t-online.de">Rudolf.Schwenger@t-online.de</a>></span><br>

<div> <br>
</div>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div bgcolor="#ffffff"><div><font size="2" face="Arial">(1) I am using the physical COM port of the NB 
(Windows XP) which is connected to the ACC socket of the FT-817 by means of a 
home made cable.</font> <br></div></div></blockquote><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div bgcolor="#ffffff"><div><font size="2" face="Arial"></font><font size="2" face="Arial">(2) I have configured COM 1 (Radio 1) as 8N2 at 
4800 Baud and I have assigned Pin 4 to CW and Pin 7 to PTT. I have also tried it 
the other way round, i.e. Pin 4 to PTT and Pin 7 to cw to no avail.</font></div></div></blockquote><br>
In your home-made cable, did you connect a <a href="http://docs.win-test.com/wiki/Interfaces#COM-port_CW_keying">serial port keying circuit</a> between the serial port DE-9 connector Pin 4, and the KEY input of your rig?  In other words, does the cable have only one connection running to the back of the rig, or two?  For CW, I think you'll need two:  one for the Accessory jack, and a second for the KEY line.<br>
<br>Did you change the FT-817 to "BK" (semi-breakin) mode as described on Page 30 of the FT-817 manual, "Operation using Straight Key/External Keying Device"?<br><br>Did you try changing COM1 from Radio 1 to "Other Interface" as suggested by W9ZRX, and use the same pin 4 and pin 7settings?  Does CW keying start to work?  If not, something is missing, such as the required keying circuit.<br>
<br>73,<br>Bob, N6TV<br>