Are you guys using MMTTY EXTFSK for PTT, as described <a href="http://docs.win-test.com/wiki/RTTY#Setup_MMTTY_PTT_Comport">here</a> and <a href="http://docs.win-test.com/wiki/BestPractice1#MMTTY">here</a>?<br><br>Are you selecting Tx Port = COM+TxD (FSK) and setting USB to option C, Limiting processing speed?<br>
<br>In the Win-Test RTTY Setup menu, you my need to temporarily uncheck the "Only show FFT Spectrum, waterfall, and XY Scope" so you can get to the MMTTY options menus when MMTTY is started by Win-Test. You are letting Win-Test start MMTTY, right, so that the two programs will communicate with each other?<br>
<br>It's hard to do diagnosis with only bits and pieces of information. If you can please post screen shots of the following on the web somewhere, that will really help.<ol><li>Win-Test SETUP screen</li><li>Win-Test RTTY Setup screen<br>
</li><li>Rigblaster virtual COM port / PTT setup screens</li><li>MMTTY setup screens (every tab, and any sub-menus that are relevant)<br></li></ol>Just press [Ctrl-Alt-Shift-PrintScreen] to copy the active window to the Windows clipboard, then Paste into Windows Paint, then save as a .PNG (portable network graphics) file and post it to the web.<br>
<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">2009/1/6 Ian Frith Broad Band <span dir="ltr"><<a href="mailto:i.FRITH@ntlworld.com">i.FRITH@ntlworld.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div bgcolor="#ffffff">
<div><font size="2" face="Arial">Hi Ben Douglas and Ozer</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">Thanks for the replies to my question,
unfortunately all suggestions have not resolved the problem. I think Douglas has
found the same as me, that you need to run wt on one com port, and MMTTY
on another com port to operate PTT, however the PTT cannot be operated by
software command It has to be operated by hardware control e.g on the ICOM 756
PRO III at ACC1 pin 3 connector. If anyone knows different would appreciate a
response.</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">73 Ian G4GIR</font></div>
<blockquote style="border-left: 2px solid rgb(0, 0, 0); padding-right: 0px; padding-left: 5px; margin-left: 5px; margin-right: 0px;"><div class="Ih2E3d">
<div style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;">----- Original Message ----- </div>
<div style="background: rgb(228, 228, 228) none repeat scroll 0% 0%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial; font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;">
<b>From:</b>
<a title="ta2rcozer@gmail.com" href="mailto:ta2rcozer@gmail.com" target="_blank">özer öksüz</a>
</div>
<div style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;"><b>To:</b> <a title="support@win-test.com" href="mailto:support@win-test.com" target="_blank">support@win-test.com</a> </div>
</div><div class="Ih2E3d"><div style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;"><b>Sent:</b> Tuesday, January 06, 2009 1:07
PM</div>
<div style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;"><b>Subject:</b> Re: [WT-support]
Win-test/MMTTY/RADIO</div>
<div><br></div></div><div><div></div><div class="Wj3C7c">And still I am waiting a comment from Win-test
programmers...<br><br>
<div class="gmail_quote">2009/1/6 özer öksüz <span dir="ltr"><<a href="mailto:ta2rcozer@gmail.com" target="_blank">ta2rcozer@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;">
<div>OK Ben </div>
<div> </div>
<div>But I already did this option after your 1 st mail.
<div><br><br>Option | Setup MMTTY(O) | TX Tab, behind the
button<br></div>"Radio command". And selected no radio.</div>
<div>Closed the MMTTY and Opened the Win-test.</div>
<div> </div>
<div>MMTTY works as a subprogram with Win-test keys well.</div>
<div>But the rig still does not TX with win-test keys.</div>
<div> </div>
<div>All other win-test and MMTTY properties works well when this
programs are in use seperate...</div>
<div> </div>
<div>Ozer,TA2RC</div>
<div> </div>
<div> </div>
<div> </div>
<div><br> </div>
<div class="gmail_quote">2009/1/6 Bernhard Buettner DL6RAI <span dir="ltr"><<a href="mailto:wintest07@dl6rai.muc.de" target="_blank">wintest07@dl6rai.muc.de</a>></span>
<div>
<div></div>
<div><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;">Yes,
because MMTTY and Win-Test cannot control the radio at the same<br>time.
If you want the usual Win-Test radio control features,<br>then MMTTY must
keep its fingers off the radio.<br><br>It's hidden in the Option | Setup
MMTTY(O) | TX Tab, behind the button<br>"Radio command". There you need to
select no radio. OK?<br><br>73 Ben, DL6RAI<br>
<div>
<div></div>
<div><br><br>> Hello Ben,<br>><br>> You wrote "When I use MMTTY
together with Win-Test, I open MMTTY first,<br>> deactivate<br>> the
radio control there, close it and then start up Win-Test with<br>>
radio control on COM5 and MMTTY configured to run as a sub<br>> process
of Win-Test."<br>><br>> How are you deactivate the radio control on
MMTTY?<br>><br>> 2009/1/5 Bernhard Buettner DL6RAI <<a href="mailto:wintest07@dl6rai.muc.de" target="_blank">wintest07@dl6rai.muc.de</a>><br>><br>> > When I
use MMTTY together with Win-Test, I open MMTTY first, deactivate<br>>
> the radio control there, close it and then start up Win-Test
with<br>> > radio control on COM5 and MMTTY configured to run as a
sub<br>> > process of Win-Test.<br>> ><br>> > So yes,
PTT and FSK can go on the same port (at least in my<br>> >
configuration this works OK) but not with Radio Control.<br>>
><br>> > 73 Ben, DL6RAI<br>> ><br>> >
_______________________________________________<br>> > Support
mailing list<br>> > <a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br>> > <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
>
><br>><br>><br>><br>> --<br>> Ozer
Oksuz,TA2RC,YM0T<br>> <a href="http://www.ym0t.com/" target="_blank">www.ym0t.com</a><br>><br></div></div>>
------=_Part_125736_15787455.1231179809400<br>> Content-Type:
text/html; charset=ISO-8859-1<br>> Content-Transfer-Encoding:
7bit<br>> Content-Disposition: inline<br>><br>> <div>Hello
Ben,</div><br>> <div> </div><br>>
<div>You wrote "When I use MMTTY together with Win-Test, I
open MMTTY first, deactivate<br>the radio control there, close it
and then start up Win-Test with<br>radio control on COM5 and MMTTY
configured to run as a sub<br><br>> process of
Win-Test."</div><br>>
<div> </div><br>> <div>How are you
deactivate the radio control on
MMTTY?<br><br></div><br>> <div
class="gmail_quote">2009/1/5 Bernhard Buettner DL6RAI <span
dir="ltr"><<a href="mailto:<a href="mailto:wintest07@dl6rai.muc.de" target="_blank">wintest07@dl6rai.muc.de</a>"><a href="mailto:wintest07@dl6rai.muc.de" target="_blank">wintest07@dl6rai.muc.de</a></a>></span><br><br>
>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px
0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">When I use MMTTY together
with Win-Test, I open MMTTY first, deactivate<br>the radio control
there, close it and then start up Win-Test with<br><br>> radio
control on COM5 and MMTTY configured to run as a sub<br>process of
Win-Test.<br><br>So yes, PTT and FSK can go on the same port
(at least in my<br>configuration this works OK) but not with Radio
Control.<br><br>73 Ben, DL6RAI<br><br>><br>>
<div><br>> <div></div><br>> <div
class="Wj3C7c"><br>_______________________________________________<br>Support
mailing list<br><a href="mailto:<a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a>"><a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a></a><br><a href="<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a>"
target="_blank"><a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a></a><br><br>>
</div></div></blockquote></div><br><br
clear="all"><br>-- <br>Ozer Oksuz,TA2RC,YM0T<br><a
href="<a href="http://www.ym0t.com/" target="_blank">http://www.ym0t.com</a>"><a href="http://www.ym0t.com/" target="_blank">www.ym0t.com</a></a><br><br>><br>>
------=_Part_125736_15787455.1231179809400--<br>><br>>
--===============1716862216==<br>> Content-Type: text/plain;
charset="us-ascii"<br>> MIME-Version: 1.0<br>>
Content-Transfer-Encoding: 7bit<br>> Content-Disposition: inline<br>
<div>><br>> _______________________________________________<br>>
Support mailing list<br>> <a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br>> <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
><br></div>>
--===============1716862216==--<br>
<div>
<div></div>
<div>><br><br>_______________________________________________<br>Support
mailing list<br><a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br><a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</div></div></blockquote></div></div></div>
<div>
<div></div>
<div><br><br clear="all"><br>-- <br>Ozer Oksuz,TA2RC,YM0T<br><a href="http://www.ym0t.com/" target="_blank">www.ym0t.com</a><br></div></div></blockquote></div><br><br clear="all"><br>-- <br>Ozer Oksuz,TA2RC,YM0T<br><a href="http://www.ym0t.com" target="_blank">www.ym0t.com</a><br>
</div></div><p>
</p><hr><div class="Ih2E3d">
<p></p>_______________________________________________<br>Support mailing
list<br><a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br><a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</div></blockquote></div>
<br>_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
<br></blockquote></div><br>