Franta,<div><br></div><div>Try this:</div><div><ol><li>RPTDELAY [Enter]</li><li>Set the delay to about 2.2 seconds</li><li>Check "Enable automatic repeating CQ" and press [OK]</li><li>Press [F1].  CQ starts.</li>
<li>Press [CapsLock].  Note the the repeating CQs continues transmitting on Radio 1.</li><li>Enter and dupe check all you want in the secondary radio window, the CQ keeps repeating on Radio 1.</li><li>Press [F4] to make a call on the secondary radio.  CQing stops immediately on Radio 1.</li>
<li>Press [F2] to send your exchange, then press [Enter] to log it</li><li>Press [CapsLock] and [F1] to resume the CQ cycle on Radio 1</li><li>Go back to Step 5 to enter more calls in the Secondary Radio window</li><li>If someone answers your CQ, press [CapsLock] to switch back to Radio 1 and press [Escape] to stop the repeat, or press [CapsLock] and start typing the call as this will also interrupt the repeating CQ.</li>
</ol><div>This technique works OK for me <span class="Apple-style-span" style="font-style: italic;">except</span> when I want to transmit on Radio 2 with the paddle.  To do that I have to press a function key first, or use [*] to swap windows.</div>
<div><br></div><div>Perhaps CT1BOH can recommend a simpler way to do SO2R that doesn't involve pressing so many buttons.  I've tried using the "Shift" key to enter data in the secondary radio window, but I find it makes too much work for my pinky fingers.  I am a touch-typist, so I keep switching from left Shift to right Shift as I type and that's even more work.  CapsLock is a little easier.</div>
<div><br></div><div>73,</div><div>Bob, N6TV</div><br><div class="gmail_quote">On Tue, Nov 25, 2008 at 1:21 AM, Franta Bendl <span dir="ltr"><<a href="mailto:dj0zy@i--i.de">dj0zy@i--i.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Hi Bob,<br>
<br>
thank you very much for the reply!<br>
<br>
Yes I know and you are right, the using of [*] covers my wish to change<br>
the status of pin 14 following the radio focus. Unfortunately there is<br>
an other issue, try this steps:<br>
<br>
Precondition: Advanced SO2R, focus R1<br>
<br>
Press [F1] - start CQ on R1<br>
Press [*] - switch active radio to R2<br>
Press any Key (letter) e.g. to check a call heard on R2<br>
<br>
Now the R1 stops the sending of CQ imediately after the first letter is<br>
typed in for R2!? So it is not really usefull in my case because the<br>
new start of CQ ([*] [F1] [*]) on the R1 is necessary after every<br>
checked call on the R2. It might be OK in "auto send" mode but it<br>
doesn't make sense if "auto send" mode is disabled.<br>
<br>
It is also clear that there remains a lack of informations because it is<br>
not possible to transfer all informations (PTT, active radio [focus],<br>
active radio [sending]) using only 2 bits (pins - PTT[16],<br>
ActiveRadio[14]). Maybe could following logic increase the clarity?<br>
<br>
1. Pin 14 follows the active radio (focus)<br>
2. for repeating CQ it switch for the time of send (following PTT) to<br>
the sending radio<br>
3. an entered character/number stops the CQ on the other radio only<br>
if "auto send" mode is enabled<br>
<br>
73 de Franta/DJ0ZY</blockquote></div></div>