As Larry says, you probably don't need LPT checked.<br><br>Assuming you are using <a href="http://usinterface.com/naviusa_004.htm">this device</a>, it appears to have a K1EL Winkey inside, so you need to tell Win-Test which virtual COM port has the WinKey.<br>
<br>In Win-Test SETUP, select "WinKey" from the appropriate COM port drop-down list, then press the [Configure ...] button, and press the [Wnkey default settings] button to set the proper baud rate, then press [OK].  You may not need to specify a PTT COM port for CW as this is usually handled by the WinKey.<br>
<br>After that, you may wish to do WKSETUP [Enter] to set the rest of the Winkey options.<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Thu, Nov 20, 2008 at 5:22 PM, Laurent HAAS - F6FVY <span dir="ltr"><<a href="mailto:f6fvy@free.fr">f6fvy@free.fr</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi Manuel<br>
<br>
Manuel Wilches a écrit :<br>
<div class="Ih2E3d"><br>
> I have the above equipment and software.<br>
<br>
</div>(snip)<br>
<div class="Ih2E3d"><br>
> COM6 - Other interface - 9600-8-N1-CW PTT<br>
> PRINTER PORTS LPT ticked<br>
<br>
</div>You have to _choose_ between the LPT port _or_ the COM6 port for the CW<br>
and PTT ouputs, but don't check both...<br>
<br>
73<br>
<br>
Larry - F6FVY</blockquote></div><br>