<div class="gmail_quote">On Sun, Nov 9, 2008 at 4:17 PM, Lorenz Grassl <span dir="ltr"><<a href="mailto:lenz@lenz-grassl.de">lenz@lenz-grassl.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
- with the VOX-switch set to "manual" WT keys the PTT (ON AIR is lit)<br>
but no HF is transmitted. The display still shows "S" instead of "PWR"<br>
while I can hear the sidetone from the TS850.</blockquote><div><br></div><div>I don't understand -- the CW sidetone indicates Win-test starts immediately, but zero power output?  It is as if PTT is not pressed?  Does your LCU-KEY (?) use Pin 16 and ground for PTT to the radio?</div>
<div><br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
- with the VOX-switch set to "VOX" PTT is keyed, Display still shows "S"<br>
instead of "PWR"<br>
- after the TX-delay the sidetone comes up and the display shows "PWR",<br>
HF is transmitted.</blockquote><div><br></div><div>TX-delay?  You mean CW PTT ON delay as shown in the attachment?  What is the value?</div><div><br></div><div>I don't think this applies here, but some laptops (especially IBM / Lenovo ThinkPad) use a different printer port address than most desktops.  See <a href="http://docs.win-test.com/wiki/Menu:Options#Printer_Ports">this link</a> for instructions how to determine the address being used by your printer port, and how to tell Win-Test to use it.</div>
<div><br></div><div>73,</div><div>Bob, N6TV</div></div>