<div dir="ltr">2008/10/6 Robert Pack, NX5M <span dir="ltr"><<a href="mailto:nx5m@txcyber.com">nx5m@txcyber.com</a>></span><br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">






<div bgcolor="#ffffff">
<div><font face="Arial" size="2">Finally figured out the problem why the FT1000D 
would not track.</font></div>
<div><font face="Arial" size="2">RTS and DTR in the config have to be set to 
HANDSHAKE.</font></div>
<div><font face="Arial" size="2">Default settings would not work.</font></div>
<div><font face="Arial" size="2">This is probably the case on the two 990's that I 
have as well and I will check into that first chance I get.</font></div></div></blockquote><div><br>Well done Bob, but I don't really understand why this would make a difference.  The
DTR (DE-9 pin 4) and RTS (DE-9 pin 7) lines are not connected to the 6
PIN CAT connector, are they?  Are they shorted together?<br>
<br>
>From the FT-1000(D) Operating Manual:<br>
<br>
<u>CAT Connector</u><br>
Pin 1: GND<br>
Pin 2: SERIAL OUT<br>
Pin 3: SERIAL IN<br>
Pin 4: PTT<br>
Pin 5: S/PO  (does anyone know what this means?)<br>
Pin 6: NC<br>
<br>What version of EPROM is in these radios?<br>
<br>
>From the FT-1000(D) Operating Manual Errata & Addendum:<br>
<br>
"To improve the versatility of external computer control of the
FT-1000, a facility to read back only the current memory number, <span style="background-color: rgb(255, 255, 204);">or a
16-byte block of VFO</span> or specified memory parameters has been added to
EPROM Q5003 on the Control Unit, from revision 6.0.<br>
<br>
"The installed EPROM revision number can be non-destructively checked
by holding the 1 and 3 keys at the upper corners of the keypad while
switching on.  The revision number appears after the display test and
manufacturer ID display.  If your revision is below 6.0, contact your
Yaesu dealer for availability and price of the upgrade."<br>
<br>
Perhaps Win-Test assumes the FT-1000D is at EPROM revsion 6.0 or higher, and
will not read frequencies accurately if the radio has the old original EPROM
chips.<br>
<br>
73,<br>
Bob, N6TV<br></div></div></div>