On Tue, Jun 10, 2008 at 3:13 AM, Toni Lindén <<a href="mailto:oh2ua@oh2u.com">oh2ua@oh2u.com</a>> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
At OG8X we used MK2R+ and FT1000MP MarkV and we noticed that if CAT<br>
was assigned to COM-port with large number (ie 8 or so), we could not<br>
get CAT-work at Win-Test.</blockquote><div><br>Did it work with any other software, like <a href="http://www.dxatlas.com/omnirig/">OmniRig</a>?  When it was on COM8, was it configured for 4800,N,8,2, DTR=Always Off, CTS=Always OFF?  By default CTS=Always ON until you press the [FT1000MP Defaults Settings] button to set up everything properly.<br>
<br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">We were using computer with many real COM port and we had to go to the<br>
Windows system manager and disable one of those real COM ports and<br>
create virtual port assigned to small number (I guess we used COM3)<br>
and radio control began to work.</blockquote><div><br>How many "real"  COM ports?  If you were using a 4-port PCMCIA card on a laptop with its own serial port, Infrared port, and Bluetooth (?), perhaps COM8 was already in use by hardware or other drivers?  If you installed the PCMCIA card <i>after</i> installing the Router software, instead of before, there could be conflicts between virtual serial ports and real serial ports.<br>
<br>I believe the MicroHAM Router software tries to determine all the real com ports before it creates virtual COM ports.  I would exit the router software, install the PCMCIA card, reboot, and see what happens with COM8.  A re-install of the Router software might also be necessary.  Do you have the latest version (<a href="http://www.microham.com/Downloads/urouter_release_05_01_01.exe">http://www.microham.com/Downloads/urouter_release_05_01_01.exe</a>)?<br>
<br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">So this seems to be WT bug, because also microHAM router was working<br>
same way like Andy told. Everything else is working OK also with COM's<br>
8 to 12 (or so), but CAT is broken.</blockquote><div><br>I doubt it is a Win-Test bug; WT thinks doesn't know it is talking to a virtual serial port.  I bet it is a configuration issue.  Using COM3 worked because you eliminated any conflict between virtual COM3 and real COM3 (or you properly set CTS=Off when you moved the radio from COM8 to COM3).<br>
<br>73,<br>Bob, N6TV</div></div>