Do you see the "CAT" light blinking on the rig?  If so, if you type a frequency in the callsign field of Win-Test, and press [Enter], does the rig QSY?<br><br>You could try changing the polling rate to see if that make any
difference.  Try 500ms, and if that works, reduce it to the lowest value
that works reliably.<br><br>I'm no expert on RigExpert, but if there is no CAT light, it could be a RigExpert USB Serial Port configuration problem, rather than a Win-Test configuration problem (sounds like you did everything right in Win-Test).<br>
<br>On page 6 of the Rig Expert manual (<a href="http://www.rigexpert.com/files/tiny_manual.pdf">English</a> or <a href="http://www.rigexpert.com/files/tiny_manual_ru.pdf">Russian</a>) it says:<br><br><div style="margin-left: 40px;">
It is recommended for all four ports to uncheck the Serial<br>Enumerator check-box in the same window:<br><br>This will eliminate a case when Windows is trying to<br>find a mouse or other device on this port when you plug<br>
in the RigExpert Tiny.<br></div><br>Did you do that on both PCs?<br><br>Note that the Rig Expert <a href="http://www.rigexpert.com/index?f=software">software compatibility page</a> doesn't list Win-Test, but if it works for the others, I don't know why it wouldn't work with Win-Test, other than the polling rate issue.<br>
<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Mon, Jun 9, 2008 at 3:03 AM, Andy Novikov <<a href="mailto:rz3em@yandex.ru">rz3em@yandex.ru</a>> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Dear Friends,<br>
<br>
Just prior the FD IARU Region 1 cw, tried to install WT in our<br>
network.<br>
Both Radios in the Network are FT-1000-MP-MarkV (one of them is<br>
version - Field).<br>
<br>
Both USB-Com interfaces are RigExpert Tiny for FT-1000 (<br>
<a href="http://www.rigexpert.com/index?s=tiny" target="_blank">http://www.rigexpert.com/index?s=tiny</a> )<br>
<br>
The PCs (WinXP Pro SP2) recognized COM 5 (CAT) and COM 6 (CW/PPT) as a<br>
ports with RE Tiny drivers. The CW / PTT from WT worked WELL via COM 6!<br>
<br>
But, the CAT was not sucessul (on both PCs / TXs)! :(<br>
<br>
The way of my config was the following:<br>
1) Options - Configure Interfaces...<br>
2) COM 5 - Radio 1<br>
3) Tranceivers - Radio 1 = FT-1000MP, Don't pool = empty, Pooling rate<br>
= Auto<br>
4) COM 5 - Radio 1 - Configure - click FT-1000MP Default Settings - Ok<br>
(the COM 5 port in the PC had the SAME settings 4800-8-n-2)<br>
5) Interfaces configuration - Ok<br>
6) Alt-J, changed manually the freq on the Main VFO, but the freq in Radio<br>
1<br>
Status bar is 18089 and does not change. :(<br>
<br>
Closed all, and in the other HAN SW (AAtest Contest Module), with the<br>
same port settings - the CAT works properly.<br>
<br>
All the time the WT was run the first (in order to occupy the port).<br>
<br>
Any suggestions, what I've done in the wrong way?<br>
<br>
Will be very thankful for your suggestions.<br>
<br>
Regards,<br>
<br>
Andy - RZ3EM<br>
-----------------<br>
RK3EXA/p team IARU Region 1 FD 2008 CW</blockquote></div><br>