<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16640" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Bob,</FONT></DIV>
<DIV><FONT face=Arial size=2>Not being a software developer here is my guess as
to how it works.</FONT></DIV>
<DIV><FONT face=Arial size=2>There is currently only a generic Kenwood file or
lookup table or array as compared to Icom and Yaesu that seem to
have one for each unique radio.</FONT></DIV>
<DIV><FONT face=Arial size=2>The kenwood file/table/array contains the strings
that send or request data over the RS232 i/f.</FONT></DIV>
<DIV><FONT face=Arial size=2>My suggestion is copy the generic Kenwood file.
Find all strings relating to the VFO B command string "FB00007001000" or
something like this and replace the FB with FC to address the SUB VFO memory
location. Save this file as Kenwood TS950 and add to the drop down selection for
radio type.</FONT></DIV>
<DIV><FONT face=Arial size=2>Maybe some software experts can shed more light on
this.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Again the reasoning behind this is</FONT></DIV>
<DIV><FONT face=Arial size=2>Run op is working away as normal.</FONT></DIV>
<DIV><FONT face=Arial size=2>Nice spot appears from cluster.</FONT></DIV>
<DIV><FONT face=Arial size=2>Sub rx op grabs the spot and confirms if can be
heard before wasting run time by the run op QSYing to try and work something we
can't hear.</FONT></DIV>
<DIV><FONT face=Arial size=2>Small advantage again.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>73</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jim</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=n6tv@arrl.net href="mailto:n6tv@arrl.net">Bob Wilson, N6TV</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=support@win-test.com
href="mailto:support@win-test.com">support@win-test.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, June 01, 2008 11:04
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [WT-support] TS950SDX sub
receiver freq</DIV>
<DIV><BR></DIV>Are there any other radios besides the TS-950SDX that support
the concept of <I>three</I> frequencies (VFO A, VFO B, <I>and</I>
SubRx)? I know the FT-1000MP always treats the SubRx frequency as VFO
B. I think the Elecraft K3 is the same.<BR><BR>Would it be acceptable to
have have [Alt] double-click put the spot frequency in <I>both </I>VFO B
<I>and</I> the SubRx at the same time? I'm guessing that might be
something that is safer to put into the code (less risk of breaking the
existing function in other radios).<BR><BR>73,<BR>Bob, N6TV<BR><BR>
<DIV class=gmail_quote>2008/6/1 Jim Fisher <<A
href="mailto:gm0nai@btinternet.com">gm0nai@btinternet.com</A>>:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV bgcolor="#ffffff">
<DIV><FONT face=Arial size=2>Hello all,</FONT></DIV>
<DIV><FONT face=Arial size=2>When in the band map window I right click on a
spot and select "Pass frequency to Sub VFO".</FONT></DIV>
<DIV><FONT face=Arial size=2>However the frequency is transfered to the B
VFO not to the Sub.</FONT></DIV>
<DIV><FONT face=Arial size=2>There is only a generic Kenwood cat file so I
guess this is normal on the other Kenwood radios without out a sub
receiver.</FONT></DIV>
<DIV><FONT face=Arial size=2>Can a TS950SDX file be created and the
frequency be sent to the Sub receiver not VFO B.</FONT></DIV>
<DIV><FONT face=Arial size=2>I think the FA/FB/FC at the start of the
frequency command represent VFO A / VFO B / SUB VFO.</FONT></DIV>
<DIV><FONT face=Arial size=2>So replace FB at the start of the string with
FC. Can it be this simple?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>73</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jim</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>GM0NAI</FONT></DIV></DIV></BLOCKQUOTE></DIV><BR>
<P>
<HR>
<P></P>_______________________________________________<BR>Support mailing
list<BR>Support@win-test.com<BR>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support<BR></BLOCKQUOTE></BODY></HTML>