<div class="gmail_quote">We can currently use WtDxTelnet to access <a href="http://www.dxatlas.com/CWSkimmer" target="_blank">CW Skimmer's</a> telnet server on localhost.  This works fine now, but only if CW Skimmer is controlling a separate Software Defined Radio, or a rig not being controlled by Win-Test.<br>

<br>If you don't have an SDR or "3rd rig", you really cannot use Win-Test with CW Skimmer very well.  Only one program can talk to the CAT port at a time, so only one program can get frequency data.<br><br>
VE3NEA solved this problem with his <a href="http://www.dxatlas.com/omnirig/" target="_blank">"Omni-Rig" interface</a> (included with CW Skimmer), which allows more than one program to share access to the same radio at the time, so both can obtain frequency data.<br>

<b><br>Suggested Enhancement 1 - Rig Type: Omni-Rig</b><br><br>Define a new rig type in Win-Test called "Omni-Rig" that communicates to the radio through the VE3NEA driver rather than directly via COM port.  Then both CW Skimmer and Win-Test can get frequency information (CAT data) from both of your radios at the same time.  In SO2R mode you could tune your second rig visually without having to listen to it carefully.  CW Skimmer could put callsigns into the band map, one at a time, as you turn the knob on the second radio, and the spot frequency would be correct.<br>

<br>Another way to use CW Skimmer would be as a virtual "partner" listening to your pileup. 
My tests indicate CW Skimmer can resolve CW tones in a pileup as long
as they are separated by at least 50 Hz.  CW Skimmer simultaneously
decodes multiple callsigns (though not as accurately or as well as a
human op, so far).  Conneced to your headphone jack, with no CAT data, CW Skimmer can only "announce" these
decoded callsigns using the calculated offset from the center of your
audio passband (e.g. -0.2 kHz, 0.8 kHz, 1.2 kHz, etc.).  This small number is used as the
"DX frequency," but Win-Test currently ignores these spots because
they appear "out of band."<br><b><br></b><b>Suggested Enhancement 2 - Populate Partner Window<br><br></b>Add an option to automatically copy callsigns from DX Skimmer spots into the Win-Test <a href="http://docs.win-test.com/wiki/Menu:Windows#Partner" target="_blank">Partner window</a> rather than into the band maps.  Regardless of how the frequency data is displayed, they could be ordered in the partner window from lowest to highest.  Only spots close to your current transmit frequency (or spots announced between -2.0 to 2.0 kHz of VFO A's current frequency) would be eligible.<br>

<br>A partner window filled by CW Skimmer would be most useful to DXpeditions, I would think, or at a multi-multi.<br><br>Please let us not debate the "CW Skimmer rules issue" here in this reflector -- that is being done quite well elsewhere, thank you.<br>

<br>73,<br>Bob, N6TV<br>
</div><br>