<div>Thank you Bob,</div>
<div> </div>
<div>This was great information.  Especially the idea of assigning IP to the band the station is working. I will file this away so when I setup a multi-multi next time this will be the way I approach it.</div>
<div> </div>
<div>Thanks again.</div>
<div> </div>
<div>73 Steve N3MX<br><br></div>
<div class="gmail_quote">2008/3/25 Bob Wilson, N6TV <<a href="mailto:n6tv@arrl.net">n6tv@arrl.net</a>>:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">In a small network, DHCP will work just fine.<br><br>In a large multi-multi with backup routers and redundant network paths, it's just easier to diagnose network problems or replace a router if every PC has a fixed local IP address assigned to it.<br>
<br>For example, you could assign these fixed and private IP addresses:<br><br><a href="http://192.168.0.160/" target="_blank">192.168.0.160</a> (160m)<br><a href="http://192.168.0.80/" target="_blank">192.168.0.80</a> (80m)<br>
<a href="http://192.168.0.40/" target="_blank">192.168.0.40</a> (40m)<br><a href="http://192.168.0.20/" target="_blank">192.168.0.20</a> (20m)<br><a href="http://192.168.0.15/" target="_blank">192.168.0.15</a> (15m)<br><a href="http://192.168.0.10/" target="_blank">192.168.0.10</a> (10m)<br>
<a href="http://192.168.0.99/" target="_blank">192.168.0.99</a> (Spare)<br><br>or a some similar method to quickly translate an IP address to a station, and vice versa.  If one PC is getting lots of packet errors due to RFI problems or hardware problems, it can be quickly identified by the failing IP address.<br>
<br>73,<br>Bob, N6TV<br><br>
<div class="gmail_quote">2008/3/24 Stephen J. Schrack <<a href="mailto:n3mx@ptd.net" target="_blank">n3mx@ptd.net</a>>: 
<div class="Ih2E3d"><br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<div>I have read through the networking section of Win-Test and have some questions.  It states that the prefered network setup is with static IP addresses. Is it possible to use Win-Test with DHCP enabled?  If I do use DHCP what Win-Test settings do I have to keep an eye on to make sure everything works correctly?  When I run multi-op I usually am only running two stations.  I only run single op or multi-two op so only two computers to worry about.  Thanks for any help.</div>

<div> </div>
<div>73 Steve N3MX</div></blockquote></div></div><br><br>_______________________________________________<br>Support mailing list<br><a href="mailto:Support@win-test.com">Support@win-test.com</a><br><a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
<br></blockquote></div><br>