On Sat, Mar 1, 2008 at 6:27 AM, Andrew O'Brien <<a href="mailto:andrewobrie@gmail.com">andrewobrie@gmail.com</a>> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
It is getting confusing responding to varying comments so I started a<br>
fresh thread.</blockquote><div><br>It is getting confusing trying to understand your various computer and network configurations.  I think we may not be able to resolve this via email.  It sound like you have a Windows networking issue, not a Win-Test issue.   You may need "on site" help from a local PC guru to get everything straightened out.<br>
<br>Wasn't it true that you received an error message trying to configure
the Windows firewall on the "bad" computer (in the shack)?  If you
can't get the Windows firewall to start or stop, then you have a very
broken Windows system (or one with another, hidden, 3rd party firewall
or virus on it).  That machine should be considered a lost cause and
you shouldn't waste any more time trying to get wtDxTelnet to work on
it until you completely reinstall Windows XP SP2 and get the Windows firewall working in a normal fashion.<br></div></div><br>Using Win-Test broadcast =
<a href="http://127.255.255.255">127.255.255.255</a>, wtDxTelnet broadcast = <a href="http://192.168.0.255">192.168.0.255</a> works fine on my
PC too.  "<a href="http://127.255.255.255">127.255.255.255</a>" is just an alias for "the broadcast address
for the local PC", so this is not too surprising.<br>
<br>In any case, here are even more questions:<br><br>Are you using a Proxy Server?  (Control Panel, Internet Options,
Connections tab, LAN Settings).  If so, you may need to check "Bypass
proxy server for local addresses".<br>
<br>Are you simultaneously running wtDXTelnet on both computers?  wtDxTelnet should only be running on ONE machine at a time.   You may want both PCs to share this single wtDXTelnet configuration, so you need to press the [By default] button in the Ethernet SETUP screen to generate the proper default broadcast address that both can share (e.g., <a href="http://192.168.0.255">192.168.0.255</a>), and use that broadcast address everywhere, on all machines, on all versions of wtDxTelnet.  If you only want it to run on a single machine, then the loopback address (<a href="http://127.255.255.255">127.255.255.255</a>) should always work unless Windows networking is broken or disabled somehow.<br>
<br>If the [By default] button generates *different* default broadcast IP addresses on each machine, that is an important clue.  You will need to resolve this.<br><br>Please do IPCONFIG /ALL on both machines and post the results.<br>
<br>Please post a snapshot of the *entire* Win-Test SETUP screen.  I wonder if you have a COM port configured as "Network" or "Packet Radio TNC"?  You definitely should NOT have either setting if you are using wtDxTelnet and Ethernet.<br>
<br>Please make sure you are signed on to both machines with an Administrator ID (Control Panel, User Accounts).<br><br>In any case, this discussion has gone on quite a while here, and may no longer be of general interest.  Perhaps it is best to take it off line until you can find a solution, then the share the fix with everyone.<br>
<br>73,<br>Bob, N6TV<br>