On Dec 8, 2007 3:07 PM, K1GQ <<a href="mailto:k1gq@mac.com">k1gq@mac.com</a>> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="Ih2E3d">> What version of firmware are you running on these Orions?<br><br></div>The latest on both Orion and Orion II. The serial port speed issue was<br>an Orion II-only problem and is no longer an issue.
</blockquote><div><br>OK, one last test then:  try commanding frequency changes using CTWin (not CT) on the same computer, using the same baud rate settings and the same hardware connections.  If CTWin controls the radio perfectly, but Win-Test does not, then I think you should definitely open a Win-Test bug report to track this.
<br></div></div><br>If CTWin also has a problem, then there could be a Windows conflict somewhere with your serial port IRQs or handshaking.<br><br>Which reminds me, did you press the [Tentec Orion Default Settings] button when configuring the COM port in Win-Test?  Pressing it sets the following (not sure if this a problem or not):
<br><br>57600,8,N,1<br>DTR (Pin4): Handshake<br>RTS (Pin7): Always ON<br><br>After doing that and exiting Win-Test, the MODE command returns:<br><br>C:\>mode com1:<br><br>Status for device COM1:<br>-----------------------
<br>    Baud:            57600<br>    Parity:          None<br>    Data Bits:       8<br>    Stop Bits:       1<br>    Timeout:         ON<br>    XON/XOFF:        OFF<br>    CTS handshaking: OFF<br>    DSR handshaking: OFF
<br>    DSR sensitivity: OFF<br>    DTR circuit:     HANDSHAKE<br>    RTS circuit:     ON<br><br>If that's what you are using, and it's a problem, maybe try "Always Off" for both DTR and RTS.<br><br>If you've already tried all this and the result is always the same (CTWin works fine, Win-Test does not), then it's a bug.
<br><br>73,<br>Bob, N6TV<br>(Just another enthusiastic CT convert to Win-Test)<br>