<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16441" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>This year on NFD at G7EAR/p we used an FT-2000 with
two networked laptops running WT v3.11.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Laptop 'A' was connected to the FT-2000 via the CAT
interface and all worked well except for one thing, which I suspect might be a
'working as designed' thing.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>We were using 2 op 1 radio mode i.e. the main
receiver and sub receiver were both active (the stereo audio output was put
through a splitter, one Rx VFO to each op). The active Tx was mainly on the main
VFO. (VFOa)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>With this setup, WT on Laptop 'A' put the focus on
VFOb. If I clicked on VFOa on the band map, it switched off the sub
receiver.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>With the transceiver in dual receive mode, the way
it worked made it impossible for the operator on VFOa to monitor the bandmap for
VFOa whilst tuning up and down the band (to see the freq of previous QSO's) and
also impossible to add spots (Ctrl Enter) for working later. Is it possible
to set this up some how?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>As I say, I suspect this is working as designed but
I wondered if there is a way to configure what I really wanted? </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>John</FONT></DIV>
<DIV><FONT face=Arial size=2>G4IRN.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>