<div>I believe the footswitch solution is only available with EZmaster.</div>
<div> </div>
<div>The Shift solution  and the footswitch are different solutions.</div>
<div> </div>
<div>Personally I prefer and think the Shift solution is the BEST overall solution for a very intensive SO2R practice, having tested many different solution throughou the years.</div>
<div> </div>
<div>Last year CQWW CW from CT3EN I remember several times writing two calls signs into radio 1 and radio 2 " at about the same time", with Radio1 running a pile-up; and radio 2 constantly looking for mults, with WT in SO2R Advanced mode and EZmaster controling R1R2 earphone audio automatically according to the moment of the QSO.
</div>
<div> </div>
<div>Example:</div>
<div>Radio 1 SM3 (did not get a full call because of pile-up)</div>
<div>radio2 SHIFT VK9 (copy the call in radio 2 during sending report to SM3 in radio 1)</div>
<div>Radio 1 ERT (get rest of the SM3 call) and rsame time see the result of check that VK9 Multuiplier [already worked, or needed])</div>
<div>etc.</div>
<div> </div>
<div>If you want to scan a band with radio 2 very quickly there is a lot of writing (calls): into radio 2 field, and not messing with radio1 run calls, and to do this jumping from radio 1 and radio 2.</div>
<div> </div>
<div>The question is write calls in radio 1, check call in radio 2 while being on the move very quickly on radio 2, checking several spots in a band, in order to be able to scan at least 40 to 50 calls in a 30 minute time frame on about 100 khz - a good standard!
</div>
<div> </div>
<div>With a rate of 4 QSOs per minute, there is about 5 seconds during each moment of the QSO, moment 1 (pile-up), moment 2 (send report to call), moment 3 get report from call, during these moments the SO2R operator is jumping the focus of his attention from one radio to the other (EZmaster+SO2R advanced mode controls this automatically).
</div>
<div> </div>
<div>Doing this procedure for 48 hours non stop, because a true SO2R operator is always checking for calls in radio 2, requires a good sincronazation, and for my personal taste the shift is the BEST for such an intense use, and save the mazimum amount of energy possible.
</div>
<div> </div>
<div>The litle left finger can be dedicated to the shift key in the keyboard, to drive the focus from radio1 into radio2 and vice-versa, that leaves you with 3left +4right fingers (not counting the thumbs), to write calls, without moving your hands from the keyboard, to save energy, and also save energy pushing your foot into the ground, because you always need to use your hands.
</div>
<div> </div>
<div>It takes practice, a clear mind and a huge dose of concentration.</div>
<div>But the rewards are great!</div>
<div> </div>
<div>BigQSos + BigMultipliers</div>
<div> </div>
<div>73</div>
<div>José Nunes</div>
<div>CT1BOH</div>
<div><br> </div>
<div><span class="gmail_quote">On 7/13/06, <b class="gmail_sendername">F6IFY</b> <<a href="mailto:f6ify@free.fr">f6ify@free.fr</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hello,<br>I am very interested if you get any reply, please summarize. I think the<br>"press shift key" solution is not usable. Personally I use the * key to
<br>change input of the radio but it change also the radio in the headset, and<br>if you use the "CTRL+L" (listen the secondary radio during transmit) it is<br>very annoying. The foot switch seems the best solution.
<br>73 Philippe - F6IFY<br><br>> -----Original Message-----<br>> From: <a href="mailto:support-bounces@win-test.com">support-bounces@win-test.com</a><br>> [mailto:<a href="mailto:support-bounces@win-test.com">support-bounces@win-test.com
</a>] On Behalf Of HA3LN Csaba NAGY<br>> Sent: Thursday, July 13, 2006 12:43 AM<br>> To: <a href="mailto:support@win-test.com">support@win-test.com</a><br>> Subject: Re: [WT-support] SO2R<br>><br>> Hi,<br>>
<br>> But this footswitch stuff works with EzMaster only, right?<br>><br>> Is there any other solution to use this secondary footswitch<br>> without EzMaster?<br>><br>> Thanks,<br>> Csaba  HA3LN / VK4ADF
<br>><br>><br>><br>> ><br>> > or use a footswitch and then no need to redefine<br>> ><br>><br>><br>> _____________________________________________________________________<br>> Július 12-én, szerdán 0 órától 24 óráig 30% kedvezménnyel
<br>> rendelheti meg az Édesvíz Kiadó összes kapható könyvét!<br>> <a href="http://www.bookline.hu/control/news?newsid=397&affiliate=bklkszkar2917">http://www.bookline.hu/control/news?newsid=397&affiliate=bklkszkar2917
</a><br>><br>> _______________________________________________<br>> Support mailing list<br>> <a href="mailto:Support@win-test.com">Support@win-test.com</a><br>> <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support">
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>><br><br>_______________________________________________<br>Support mailing list<br><a href="mailto:Support@win-test.com">Support@win-test.com</a><br><a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support">
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br></blockquote></div><br>